2016 Motorcycle Cannonball

2016 Motorcycle Cannonball

Tuesday, September 18, 2018

Our Day Off

Jason sent us a text early Monday morning to rest, relax, recoup, and enjoy our day off. Team 96 has work to do.



My souvenir from Mt Rushmore. I kind of wanted one of those small statues, but got this instead


We started to work at 8:00 am, completely taking the old indian apart. The heads of the valves had just popped off, so I displayed the carnage as it came apart. It was the talk of the parking lot.




Broken valves and hammered piston

So the list of repairs and adjustments was pretty extensive, including rebuilding a motor, fixing a leaking gas tank, servicing clutch and carrier bearings, changing wheels from 23" clinchers to my spare 21", welding rear fender and making a brace, and changing carburetor. We tore into it.



About 1:00




We worked thru lunch, then thru supper, finally cranking the bike and tuning the linkert carb about 10:00 pm. It was a long day, but team 96 will start stage 10!

I cannot thank Mike Podger, Joe Gimpel, and Patty Jones enough for all there help. They hung in there all day, making it happen. 

It's the Cannonball.






Monday, September 17, 2018

The Black Hills

Stage 9 from Pierre to Sturgis, then a much needed rest day. A long one at 300 miles, or third long hard day in a row. Just get there, and some much needed maintenance. Easing along at about 50 miles, I heard a pop, then a metallic clanck. Pulling to the side of the road, I start looking for the problem. Only firing on one cylinder. Check the plug wires, then the mag, the realize the front exhaust valve is hung open. About this time fellow rider Joe Gimpel stops, and decide to pull the pocket valve. I remove the front intake, and the valve face is gone, with a large piece of it stuck in the exhaust valve. Off comes the head. About now the support wagon pulls up to pick me up, but I convinced them I could fix it. So we put another intake valve in, and took off, but way behind schedule. For the next 50 miles, the grim reaper sweep bus rode right on my tail, so I really hated to stop and let them know my fuel tank was leaking.

Now I have another dilemma, so I just dump the fuel in the font tank, and take off on the rear, trying to stay on time. We rode thru the Badlands, and came across some other bikes having problems, so the chase truck got off my case for a while. Then about 5 miles from gas in Rapid City, I ran out and had to wait for the truck with some spare gas.


Out of gas in South Dakota



By the time I was rolling again, I was late again, but picked up an hour by not stopping for lunch. With only about 60 miles to go, I turned off the highway headed toward mt Rushmore and the Black Hills. The bike was not running well at all, and I didn't think it would climb the hills that were coming. It got very hot climbing, and I walked along side pushing and slipping the clutch for the last bit up Rushmore. It got so hot the intake manifold hose melted. Refusing to quit, I got a Mt Dew can from a park ranger and cut a bandaid for the tube.


Mt Dew Manifold


After cooling down a bit I took off towards Sturgis, just 60 miles to go and just enough time. Easing along, enjoying the black hills, and the motor broke another intake valve. Only this time, it took the head with it. So after so much struggle, the day was done about 69 miles to soon.



End of the Road

Lots of work to do our day off!



Midway: Recap of 1800 miles

The days fly by on these events. You lose track of where you are, what day it is, etc. it's also hard to find time to get everything done. Day 1 and 2 went smoothly, with minimal trouble. The adjustments to the bike made over the last two years seem to be working. We made every mile, and are running in the top 10.

Day 3 was rained out, with over 3" of rain some the roads were flooded and unsafe, so we trailered the bikes to the next stop. Things go pretty smooth over the next stages, with flat roads, cool conditions, and minimal trouble. Still running a perfect score.


Pulling into Anamosa Iowa 


Things started getting exciting on stage 7 from Anamosa to Spirit Lake. It was another long day, and as I pulled into the hosted lunch stop, I realized my rear tire was going flat. So during lunch I removed the tire and found a valve core leaking. So after reinstalling the wheel, I left the lunch stop a little late. About 65 miles later the tire was flat again, so I replaced the tube on the side of the road. Shortly thereafter, I was removing the tire for the third time. This time I had to patch the tube, and I removed the rim lock, and headed to the destination at the Indian Motorcycle Factory. Knowing I would be close, I rode it hard, squeaking in with 3 minutes left of my 45 minute grace period. Still on perfect score, and running 7th.


Arrivng at Spirit Lake

Stage 8 took us into South Dakota, and the terrain started to roll and the winds picked up. Another long day (300 + miles) and the bike is showing it's age. Arrived at the hosted dinner by the Missouri River with the bike barely running. A long night replacing intake valves, dome washers, and springs, and we head for Sturgis and a day off. Still on perfect score, and running 7th.



Monday, September 10, 2018

Day 1: Portland Maine

Arrived at Portland Maine, ready to get the event started, along with approximately 106 other riders. Went to Bug Light Park for the official photo and start, and again had to deal with heavy traffic. Beautiful day and setting for ceremonial start.




Bug Light Park






Day 1 Start

Day 1 ended in Keene New Hampshire, after 150 miles. Very pretty ride through Maine and 
southeastern New Hampshire. I broke the front brake stay in the first 20 miles, had to tie wire it in 
place hoping I could find a welder at the lunch stop at Rodchester Harley Davidson.




Slipped right in the service department and Mike fixed me up.

After lunch the road headed southwest to Keene, and the bike began running poorly, but I was able to make it in without penalty. Upon inspection I found the rear intake valve adjuster had vibrated off, so the bike was running on only 1 cylinder. Further inspection revealed a broken rear fender support, so we welded it up. Topped off the gas and oil, and ready for day 2.












Monday, September 3, 2018

2018 CANNONBALL: Portland to Portland

The 2 years that separate each Motorcycle Cannonball have flown by. It is hard to believe that we leave for Portland Maine in the morning. Registration is Thursday, followed by a new promotion stage on Friday, then the official start Saturday morning. Headed west.

The bike eligibility was extended to 1928 this time, but I knew I had to ride the 14 Hedstrom again. I'll be in class 2, and one of the older bikes. A Singlespeed. I did fit a front brake this time. The reoccurring issues we battled in 2016 have been addressed, and I hope solved. Time will tell. The Hedstrom era Indians have not had great success on previous Cannonballs, But maybe this is the year we get one across!

It's the challenge that brings over 100 like minded riders, from all walks of life, to the Cannonball every two years. I'm sure the organizers have put together an amazing ride, with lots of cool destinations and events, but we all know the best stuff lies in the unexpected.




Portland or Bust! (Both of Them)