Stage 13 : Route 66

the day started out nice and cool, with a good ride down old Route 66. We followed the old route from Williams Az to Lake Havasu City. There is a lot of history along that old road, along with the remnants of days gone by. The thought I kept having was that I was riding a machine from an era even before Route 66. Kind of amazing.

Our lunch stop was hosted by Mother Road Harley Davidson, and as with all the previous stops the crowd was huge. The people really turn out to see the old bikes. I pulled in with Victor, only to discover my fuel tank was leaking again.

.

The road after lunch took us down from 7000 ft to 400 ft. Temperatures picked up also, as we head towards California. Still tracing Rote 66,

we got Havasu City by 4 pm, and had a reception with another large crowd.

Then it's back to the motel to get ready for Stage 14. Got to fix a broken rear fender, install another brake band, fix a fuel tank, load tomorrow's route, and whatever else we find. It all makes for a pretty long day. 

Williams Az

Getting  ready to head down from 7000 ft to 400 ft. It's 35 degrees, heading to 90. Gonna be a challenge. At least it's not raining.

Some pretty cool Michael Lichter shots

Probably the only thing I've passed

Climbing a Grade

Grand Canyon

Durango to Page Az for stage 9 was a beautiful run. Southwest Colorado is a beautiful place, then the canyons of the Navahoe are special. You just can't ride thru without thinking of the history. We went thru four corners, then followed the high plains into Page Az. Crossed lake Powell on the way in. The bike really ran well with all the "adjustments". Valves seem to be seated well, and the domes are holding.

Stage 10 took us to the south rim of the Grand Canyon. I was looking foward to today for many reasons, but the weather had another idea. The  rain and wind were so hard that it was hard to ride, and the canyon was completely socked in with fog. Made all the miles again for the 2nd day since all the valve problems.

The Grand Canyon 

Headed up the road 

Durango Colorado

its been a couple of tuff days for. Team 96. Leaving Dodge City, I completely blew the top off both intake valve domes. 13 miles into the day and I was done. Being early, I decided to take the penalty points and leave course with my support. We drove on to Pueblo and I rebuilt the top end in the back of the van.

Getting ready to run the following morning, it became obvious I had bigger problems. The valves
would not seal, and I would have to do a complete valve job. So we loaded the van and headed over Wolf Creek Pass to Durango. It was tough to be not riding on some of my favorite roads.

We got to Durango in time to make the repairs, and are ready for Wednesday morning.

Rest Day

The rest day. A chance to take a little break, get a few items sorted on the bike, and relax.
Not today.

We started around 9:30 am, and packed it in at 9:00 pm. 12 hours in the parking lot, trying to get things patched up. The rear tire was changed, along with repackaging the loose ball bearings. The brake band was bent, so a little time and some persuasion was applied. We then reclined a spare brake band with the new material sent from Dalton.

The valve pockets and heads were removed. All 4 valves were removed, cleaned, and lapped. The rear intake spring had collapsed, just like the front had done back in West Va. I was lucky it cost me points yesterday. We found some high temperature sealant to try on the domes, and are hoping it works. I got some new stainless springs for the intakes.

.

As of 10:30 pm, the bike is ready again. I think it is back in pretty good shape for the second half of the a Cannonball. We will find out starting at 8:00 am.

Headed to Colorado!

Stage 8

Stage 8 was a 184 mile run from Wichita to Dodge City Kansas. The roads took us the farm land of central Kansas, and was a good ride. The bike was not behaving today, with the intake seals leaking and I'm having fueling problems. I stopped twice to drain the float bowl, letting water and trash out. The air leaks on the valve domes continue to be a problem. In the old days these were sealed with asbestos, but that is hard to come by today.

I limped along with very limited power, thank goodness the roads were ere flat. I pulled into the finish at the foot of Boot Hill, barley running and proud to be there. Tomorrow is the rest day, and I'll have to get this thing running better. I'll have to get it running a lot better before Colorado.

Dodge City Kansas

Wyatt Earp old Jail

New Brakes

I have been wondering about my decision to ride this bike in its original condition. The brakes are next to nothing, which becomes challenging in traffic. So we have been trying to come up with a solution. The boys back home sent word they come up with a plan they thought would help, and had forwarded the parts to Wichita. I was excited to finally be getting some help.

We got the box from and front desk, and went to work with the installation. Thankfully they included instructions.

So within minutes I was ready to go